EVMAGNETWIRE.COM | CHINGCUNG® Ultra-High Temp Series
PIW Rectangular Enameled Copper Wire
Class 240 Aromatic Polyimide Insulation | Grade 2 Heavy Build |
Superior Thermal Endurance (240°C) | Aerospace & Extreme
Environment
PIW Class 240: Extreme Thermal Performance
PIW rectangular wire with Grade 2 aromatic polyimide insulation
(Class 240)offers the highest thermal stability in our portfolio: cut-through
≥450°C, continuous operation at 240°C. Outperforms conventional
Class 220 wires by a significant margin. Unmatched reliability for
aerospace, downhole drilling, and high-power EV systems. Grade 1
& Grade 3 also available.
✓Grade 1 / Grade 3 optional
PIW Technical Edge
Model Series:PIW (Aromatic Polyimide / GB/T 6109.22)
Heat Shock:260°C (no cracking, superior stability)
Breakdown Voltage (Gr.2):≥3500V - 7000V (depends on dimensions)
Radiation & Chemical:Excellent resistance to nuclear radiation, solvents, cryogenics
Elongation:≥ 22% (flexible for tight forming)
Copper fill factor:Up to 28% higher than round wire → lower losses
PIW Rectangular Dimensions (Grade 2 Heavy Build – Class 240)
a x b (mm)
Tolerance (mm)
Min. film build Gr.2 (mm)
Max. outer dimension (mm)
Typical Breakdown (V)
1.00 x 2.00
±0.03/±0.05
0.045
1.10 x 2.10
≥3200
1.20 x 2.50
±0.03/±0.05
0.050
1.32 x 2.62
≥3800
1.50 x 3.00
±0.04/±0.06
0.050
1.62 x 3.12
≥4200
1.80 x 4.00
±0.04/±0.06
0.055
1.93 x 4.13
≥4800
2.00 x 5.00
±0.04/±0.07
0.055
2.14 x 5.14
≥5300
2.50 x 6.30
±0.05/±0.08
0.060
2.65 x 6.45
≥6000
3.00 x 8.00
±0.06/±0.10
0.065
3.18 x 8.18
≥6800
Representative dimensions for Grade 2 aromatic polyimide heavy
build. Custom sizes 0.0125 – 25 mm² available. Superior cut-through
makes PIW ideal for extreme high-temperature windings.
PIW Advantages: Rectangular + Class 240 – The Ultimate Combination
Rectangular > Round
Higher slot fill factor (+25~30%), lower copper losses, better heat
dissipation. Critical for compact high-power density designs.
Class 240 Aromatic Polyimide
Continuous 240°C operation, cut-through >450°C – outperforms
conventional Class 220 by a wide margin.
Grade 2 Heavy Build
Enhanced dielectric strength, excellent voltage endurance for
high-stress inverter & aerospace applications.
Radiation / Chemical Resistance
Remarkable stability under gamma radiation, aggressive chemicals,
cryogenic temperatures – ideal for nuclear, space, deep drilling.
Why PIW rectangular wire outperforms traditional round wires?
Rectangular cross‑section maximizes copper fill in limited slot
area, reducing I²R losses and improving thermal conductivity. When
combined with aromatic polyimide (Class 240), it delivers the highest heat resistance available for magnet
wires. PIW maintains excellent electrical properties at 240°C
continuous duty and survives extreme overloads up to 450°C
cut‑through. This makes it the first choice for aerospace
actuators, high‑temperature transformers, downhole motors, and
next‑generation EV traction drives where reliability under extreme
heat is non‑negotiable. CHINGCUNG's advanced extrusion and
die‑forming ensure uniform Grade 2 insulation on rectangular
profiles, even on sharp corners.
* Valid for copper wire. For aluminum or CCA, net weight varies.
High-temperature polyimide wire is supplied with moisture-proof
vacuum packaging to preserve insulation properties.
PIW Critical Applications
Aerospace actuators & motors,Downhole drilling equipment,EV extreme-performance motors,High-temp transformers (240°C),Nuclear reactor instrumentation,Satellite mechanisms,High-power density converters,Oil & gas subsea pumps
Why PIW Class 240 Outranks Class 220 & Conventional Films
Aromatic polyimide (PI) exhibits superior thermal oxidative
stability compared to polyamide-imide (PAI) or polyester-imide.
With continuous operation at 240°C and cut-through exceeding 450°C,
PIW rectangular wire withstands extreme overloads where AIW or
conventional wires would fail. Additionally, PI offers exceptional
radiation resistance (up to 10⁸ Gy) and low outgassing, making it
mandatory for space and nuclear applications. The Grade 2 heavy
build further ensures dielectric integrity under high-voltage
stresses. CHINGCUNG's PIW series is manufactured with precision
multi‑coat technology to maintain film flexibility and adhesion,
even on rectangular profiles with tight corner radii.
CHINGCUNG – Pioneering High-Temp Rectangular Wire
§Dedicated Class 240 polyimide production line with advanced
multi-pass coating.
§ISO 9001 & AS9100 quality management for aerospace-grade wire.
§Monthly capacity exceeding 100 tons for polyimide rectangular
wires.
§In-line eccentricity and pinhole inspection ensures Grade 2
reliability.
§Fast response for custom cross-sections, hybrid builds and special
packaging.
Q1: What is the key advantage of PIW Class 240 over AIW Class 220?
A: PIW withstands 240°C continuous (vs 220°C) and offers
cut-through >450°C, superior radiation resistance, and low
outgassing – critical for aerospace, downhole, and extreme EV
applications.
Q2: Why choose rectangular over round for high‑temperature
windings?
A: Rectangular wire provides significantly higher copper fill,
better heat dissipation, and reduced AC losses — essential for
compact high-power-density designs at elevated temperatures.
Q3: Can PIW be used in oil-filled transformers or harsh chemicals?
A: Yes. Aromatic polyimide has outstanding resistance to
transformer oils, refrigerants, and most solvents, making it ideal
for hermetic and industrial applications.
Q4: Is Grade 2 heavy build available for all PIW rectangular sizes?
A: Absolutely. We supply Grade 2 as standard for superior
insulation, with Grade 1/Grade 3 available on request. Custom film
builds can be engineered.
Push the limits with PIW Class 240 Request a quote for your rectangular dimensions & thermal
requirements.
Shanghai Husu M&E Technology Co., Ltd has been a reliable
supplier of high-performance enameled wires since 2015. Under our
brand CHINGCUNG, we serve global manufacturers with quality
products and professional service.
EVMagnetWire.com is our dedicated platform for regular enameled
wires — including copper, aluminum, and copper-clad aluminum
conductors, with thermal ratings from 130L to 240. Our product
range covers polyester, polyurethane, polyesterimide,
polyamide-imide, and polyimide insulation systems, complying with
IEC, GB, NEMA, and JIS standards.
Unlike our specialty wire platform (chingcung.com) which focuses on
self-bonding wires and PMSM motor components, this website is built
exclusively for customers seeking standard, off-the-shelf enameled
wires for motors, transformers, coils, and household appliances.
Our factories are located in Jiangsu and Zhejiang, equipped with
automated painting and baking lines, advanced testing instruments,
and strict quality management systems. With a monthly production
capacity of 100 tons for regular enameled wires, we ensure stable
supply, competitive pricing, and timely delivery to North America,
Europe, and Asia.
Monthly Capacity: 100 tons Standards: IEC, GB, NEMA, JIS Export Markets: North America, Europe, Asia
